Feiss F1942 - Manual

(E) REV 02/03//05
ASSEMBLY I NSTRUCTI ONS FOR F1942/5
M U R R A Y F E I S S
©MURRAY FEI SS I MPORT LLC.
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Carefully thread fixture wire and ground
wire through fixture loop. Screw fixture
loop onto top threaded pipe until secure.
2. Spread open all arms so they are spaced
evenly to each other.
3. Lower arm assembly:
A. Straighten lower arms in upright
position as shown in diagram.
B. Install rest of lower arm onto center
body by fastening with machine screw
from inside. Tighten with enclosed hex
key.
C. Screw threaded stud into a finial.
D. Install cap onto center body by
fastening with finials from top and
bottom.
E. Install lower arms onto bottom of
upper arms by fastening with cap screw.
4. Install shades onto fitters by fastening
counter rings onto threaded sockets.
5. Install bulbs (not included). See
relamping label located at socket area
for type and maximum allowed wattage.
6. Follow enclosed “Chain Suspended
Fixture Installation Instructions” for
electrical and fixture installation onto
ceiling outlet box.
Bulb
(not included)
Counter Ring
Glass
Shade
Fixture Wire
& Ground Wire
Lower Arm
Fixture Loop
Upper Arm
Fitter
Cap Screw
Finial
Center Body
Threaded Stud
Cap
Hex Key
Machine Screw
Finial