Feiss F2637 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs not included.
1. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house
outlet box. If you do not have an outlet box at
desired location to attach the fixture then hire a
qualified electrician to create one.
2. A. Install candle tube by slipping through sockets.
B. Slip candle follower on top of candle tubes.
C. Install type-B, candelabra base, of 60 Watt
maximum bulbs (not included).
3. Hang all crystal glass parts as shown on diagram.
NOTE: To replace broken crystal or pin, extras are
included in hardware bag. Replace by gently bending
open pin, remove broken crystal or pin, hook new
one, then close back pin. Avoid bending pin into
sharp angle.
Assembly Instructions For
F2637/4
(E) 12/10
1
2A
2C
2B
3