Feiss F2660 User Manual
Assembly instructions for, E) 12/10
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly.
Bulbs not included.
1. Slip fixture loop down through the fixture wires, and
then screw on top of fixture.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture then hire a qualified
electrician to create one.
3. A. Install stem onto bottom of fixture.
B. Install candle tube by slipping through sockets.
C. Install candle tube cap onto the top of the candle
tube.
D. Install type-B, candelabra base, of 60 Watt maximum
bulbs (not included).
4. Install ring onto bottom of fixture with ball cap screws.
5. Hang all crystal glass parts as shown on drawing.
NOTE: To replace broken crystal or pin, extras are
included in hardware bag. Replace by gently bending
open pin, remove broken crystal or pin, hook new one,
then close back pin. Avoid bending pin into sharp
angle.
Assembly Instructions For
F2660/6
(E) 12/10
2
6 Sets
A
A B C B C B C
B C B
6 Sets
4
1
3A
3D
3C
3B
1
2
3
4
5
1
X6
X12
X6
X6
X18
X18
X1
2
X1
X1
X1
X1
X1
X1
X1
X1
X1
3
4
5
REQUIRED
X1
X3
X1
X1
X2
X1
X1
EXTRA
12
6
PIN
EXTRA
1
2