Feiss F2926-3-6-6 - Manual

1
Installation Instructions for
Huntley 15 Light Chandelier
1.1
F2926-3-6-6
Chandelier
F2926/3+6+_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Assemble the fixture by screwing the short stem to the middle tier, then screwing the top tier to the short stem.
Screw the long stem to the top tier.
Place the decorative washer onto the bottom of the bottom tier and secure it in place by screwing on the finial stem.
Install the finial by screwing it onto the finial stem (for cylindrical finial option, leave out the installation of the finial stem).
Place the shade and spacer over the socket, then secure them by tightening the collar nut onto the socket using the shade
tool; repeat for remaining sockets.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
3
4
1A
DECORATIVE WASHER
2
5
7
6
LAMP
SOCKET
SHADE
LONG STEM
COLLAR NUT
SHADE TOOL
1
4
SPACER
FINIAL STEM
FINIAL
3
TOP TIER
7
5
SHORT STEM
6
2
1
MIDDLE TIER
BOTTOM TIER
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.