beautypg.com

Feiss F1918 User Manual

E) 10/04

background image

(E) 10/04

ASSEMBLY INSTRUCTIONS FOR F1918/12+1

M U R R A Y F E I S S

©MURRAY FEISS IMPORT LLC.

IMPORTANT:

TURN OFF THE POWER AT THE

MAIN FUSE OR CIRCUIT BREAKER

BOX BEFORE STARTING

INSTALLATION

Carefully unpack and identify all parts

before assembly. Bulbs are not included.

1. Sit center cage and then center glass

shade gently onto center socket. Lock them

together by fastening with ring and counter

ring. Do not yet install cover.

2. Install arms:

A. Remove coupler located below lower

center body. And then slide out lock

washer and plate. Set them aside.

B. Spread open arms so they are evenly

spaced out to each other. Fasten lower

section of arms securely onto lower

center body with machine screws from

inside. Tighten them with enclosed hex key.

C. Install back the plate onto lower center

body by fastening with lock washer

and coupler.

D. Take fixture wires and ground wire,

exiting above upper center body, and thread

through short threaded pipe, notched cover,

and fixture loop. Then screw short threaded

pipe securely into coupler. Slide notched

cover through short threaded pipe untill it’s

notches properly checks onto extension arms.

Then lock all together by fastening

fixture loop.

3. Follow enclosed “Over 50 lbs. Chain

Suspended Fixture Installation Instructions”

for electrical and fixture installlation onto

ceiling outlet box.

4. Install a standard A-19 medium base of

100 Watt maximum bulb (not included) into

center socket.

5. Take the cover and gently glide through

in between arms. Then install it on top of cage.

6. Install side glass shade by sitting onto fitter.

Then install a G-16 1/2 candelabra base of 60

Watt maximum bulb (not included) into socket.

Repeat others.

7. Install font by screwing into coupler located

at lower center body.

Bulb

(Not

included)

Cover

Counter

Ring

Socket

Ring

Center

Glass

Shade

Cage

Fixture Wire

& Ground Wire
Fixture Loop

Notched Cover

Short Threaded Pipe
Coupler
Extension Arms
Upper Center Body

Bulb G-16-1/2

(Not included)

Lower

Center Body

Center

Socket

Plate

Lock Washer
Coupler

Font

Arm

Fitter

Side

Glass

Shade

Machine Screw
Hex Key