Feiss F2224 - Manual

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR F2224/6, F2225/6+3
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Socket
Bulb
(not included)
Wrench
Fixture Loop
Fixture Wires
Glass
Shade
Spacer Tube
Carefully unpack and identify all parts
before assembly. Bulbs are not
included.
1. Install fixture loop by screwing onto
threaded pipe which is located at top of
fixture
2. Install a hex nut onto one end of
threaded pipe leaving about 3/8" (10
mm) of thread exposed. Screw same
end of pipe into coupler located at
bottom of fixture. Then slip font
through the pipe and secure by
fastening with a finial.
3. Follow enclosed supplement
installation instructions for electrical
and fixture installation onto house
outlet box. If you do not have an outlet
box at desired location to attach the
fixture than hire a qualified electrician
to create one.
4. Place Shade over threaded socket then
spacer tube and secure with counter
ring, using supplied wrench.
5. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.
Finial
Font
Threaded Pipe
Coupler
Arm
Counter Ring