Feiss F1836-3 - Manual

(E) 09/03
ASSEMBLY INSTRUCTIONS FOR F1836/3
M U R R A Y F E I S S
©MURRAY FEISS IMPORT CORP.
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Remove counter ring from sockets.
2. Install shades onto fitters by fastening
counter rings onto threaded sockets.
3. Install bulbs (Not included). See relamping
label located at socket area for type and
maximum allowed wattage.
4. Follow enclosed “Chain Suspended
Fixture Installation Instructions” for
electrical and fixture installation onto ceiling
outlet box.
5. This fixture is supplied with 2 threaded
chain links. These links are opened and
closed by twisting cylinder on chain link.
One threaded chain link should be installed
onto the fixture loop and the other should be
installed onto the canopy loop. The standard
chain should be installed in between these 2
threaded chain links.
Machine Screw
Small Hex Nut
Ball Cap Nuts
Canopy
Threaded
Chain Link
Threaded
Chain Link
Chain
Fixture Loop
Mounting
Plate
Canopy Loop
Bulb
(not included)
Counter Ring
Glass Shade
Socket
Fixture Wire
& Ground Wire
Small Hex Nuts
Canopy Loop
Fixture Loop
Threaded
Chain Link
Mounting Plate Mounting Screws
Counter Ring
Ball Cap Nuts
Fitter
Canopy
Fig. 1
Twist to open or close
chain link.
Threaded Chain Link