Feiss F2046-3 - Manual

(E) 9/05
ASSEMBLY I NSTRUCTI ONS FOR F2046/3
M U R R A Y F E I S S
©MURRAY FEI SS I MPORT LLC.
IMPORTANT
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Install center body by screwing into center
column.
2. Screw threaded pipe into bottom of socket
assembly. Note correct position of threaded
pipe at illustration.
3. Install arms onto center body by fastening
with ball cap nuts.
NOTE: Extra ball cap nuts can be
found in a plastic pouch attached inside
of box.
4. Follow enclosed “Chain Suspended
Fixture Installation Instructions” for
electrical and fixture installation onto
ceiling outlet box.
5. Install bulbs (not included). See relamping
label located at socket area for type and
maximum allowed wattage.
6. Slip glass shade through threaded pipe. Lock
them into position by fastening with washer
and hex nut. Do not over tighten.
7. Slip cap and fasten finial onto threaded pipe.
8. Position glass shade to align holes properly
with arms. Slip ball cap screw through hole
in glass and then through tab. Secure them
together by fastening with small hex nut
from behind. IMPORTANT: DO NOT
OVER TIGHTEN.
Bulb
(not included)
Tab
Socket Assembly
Long Threaded Pipe
Glass Shade
Cap
Ball Cap Screw
Flat Washer
Hex Nut
Finial
Center Column
Small Hex Nut
Arm
Center Body
Fixture Loop