Feiss F2219-3 - Manual

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR F2219/3
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Socket
Bulb
(not included)
Fixture Loop
Shade
Carefully unpack and identify all parts
before assembly. Bulbs are not
included.
1. Install fixture loop by screwing onto top
of fixture
2. Screw short threaded pipe into bottom
coupler. Then slip lower font through
the pipe and secure by fastening with a
finial.
3. Follow enclosed supplement
installation instructions for electrical
and fixture installation onto house
outlet box. If you do not have an outlet
box at desired location to attach the
fixture than hire a qualified electrician
to create one.
4. Install shades onto fitters by fastening
counter rings onto threaded sockets.
5. Install bulbs (not included). See
relamping label located near socket area
for type and maximum allowed
wattage.
Finial
Lower Font
Short Threaded Pipe
Arm
Counter Ring