Feiss F1885-3 - Manual

(E) 04/04
ASSEMBLY I NSTRUCTI ONS FOR F1885/3
M U R R A Y F E I S S
©MURRAY FEI SS I MPORT CORP.
IMPORTANT
TURN OFF THE POWER
AT THE MAIN FUSE
OR CIRCUIT BREAKER
BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify
all parts before assembly. Bulbs
are not included.
1. Carefully thread fixture wire and
ground wire through fixture loop.
Screw fixture loop onto top
threaded pipe until secure.
2. Remove counter rings and check
rings from sockets.
3. Install shades onto fitters by
fastening back check ring
(smaller opening side facing
down) and counter ring onto
threaded sockets.
4. Install bulbs (Not included). See
relamping label located at socket
area for type and maximum
allowed wattage.
5. Follow enclosed “Chain
Suspended Fixture Installation
Instructions” for electrical and
fixture installation onto ceiling
outlet box.
Fixture Loop
Fixture wire
and Ground Wire
Top Threaded Pipe
Bulb
(not included)
Counter
Ring
Check Ring
Glass Shade
Socket
Fitter