Feiss SF231 - Manual

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR SF231
IMPORTANT:
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION.
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Screw center pipe onto fixture plate while
removing any slack in wires in between parts.
2. Install arms:
A. Install top section of arms onto fixture
plate by fastening with round washer and
hex nut from other side.
B. Install bottom section of arms onto
crown by fastening with short screw.
3. Install long threaded pipe by screwing
into coupler located at center of socket
assembly. Note correct position
at illustration.
4. Install light bulbs (not included). See
relamping label located near socket area
for type and maximum allowed wattage.
5. Follow enclosed “Multiple Standard
Installation Instructions” for electrical
and fixture installation onto ceiling
outlet box.
6. Slide glass shade through the long
threaded pipe till it securely checks onto
crown. Secure in position by fastening
with a round washer and hex nut. Do not
over tighten.
7. Slip font onto same threaded pipe and
secure with finial.
Hex Nut (small)
Long Threaded Pipe
Shade
Font
Fixture Plate
Bulb
(not included)
Finial
Hex Nut
Round Washer
Crown
Ball Cap Nut
Center Pipe
Lock Washer
(small)
Short
Screw
Arm