Feiss SF212 - Manual

(E) 9/05
ASSEMBLY I NSTRUCTI ONS FOR SF212
M U R R A Y F E I S S
©MURRAY FEI SS I MPORT LLC.
Bulb
(not included)
Socket Assembly
Glass Shade
Threaded Pipe
Hex Nut
Washer
Cap
Cap
Finial
Fixture Plate
IMPORTANT
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs are not included.
1. Screw short threaded end of threaded pipe into
coupler located at bottom of socket assembly.
Note correct position of threaded pipe at illustration.
2. Follow enclosed “Multiple Standard Installation
Instructions” for electrical and fixture installation
onto ceiling outlet box.
4. Install bulbs (not included). See relamping label
located at socket area for type and maximum
allowed wattage.
5. Slide cap, open side facing down, and glass shade
through the threaded pipe. Secure in position by
fastening with a washer and a hex nut.
Do not over tighten.
6. Slip cap and fasten finial onto threaded pipe.