Feiss SF275 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulbs not included.
1. Install center pipe by screwing into coupler located at
bottom of socket assembly. Note correct position of
center pipe at illustration.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture then hire a qualified
electrician to create one.
3. Install bulb (not included). See relamping label located
at socket area for type and maximum allowed wattage.
4. A. Slide cup, open side facing down, and shade through
the threaded pipe until shade comes to a stop.
B. Secure shade into position by fastening with a
washer and a hex nut. IMPORTANT: DO NOT OVER
TIGHTEN.
C. Slip cap and secure by fastening finial.
Assembly Instructions For
SF275
(E) 10/09
3
1
4A
4B
4C
2