Feiss SF259 - Manual

(E) 10/08
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulbs not included.
1. Install center pipe by screwing into bottom of socket
assembly. Note correct position of center pipe at
illustration.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture than hire a qualified
electrician to create one.
3. Install bulb (not included). See relamping label located
at socket area for type and maximum allowed wattage.
4. Install shade by slipping through the installed center
pipe and then fastening with finial. IMPORTANT: Do
not over tighten.
NOTE: During shade installation, make certain vertical
tubes are inserted inside of shade.
Assembly Instructions For
SF259
Bulb
(not included)
Socket
Fixture Plate
Shade
Verticle
Tubes
Center Pipe
Finial
3
1
4
2