Feiss SF263 User Manual
Sf263, Assembly instructions for
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulb not
included.
1. Screw the long threaded pipe into coupler located at bottom of
socket assembly. Note correct position of threaded pipe at
illustration.
2. Follow enclosed supplement installation instructions for electrical
and fixture installation onto house outlet box. If you do not have
an outlet box at desired location to attach the fixture than hire a
qualified electrician to create one.
3. Install bulb (not included). See relamping label located near
socket area for type and maximum allowed wattage.
4. Install shade by slipping through the already installed center pipe
and then fastening with a finial. Do not over tighten.
Assembly Instructions For
SF263
Bulb
(not included)
Finial
Shade
Fixture Plate
(E) 11/08
Long
Threaded Pipe
4
2
3
1
- VS3900_ (4 pages)
- VS4000_ (4 pages)
- VS50003 (4 pages)
- VS4200_ (4 pages)
- VS43003 (4 pages)
- VS44001 (4 pages)
- VS45003 (4 pages)
- VS46002 (4 pages)
- VS47002 (4 pages)
- VS48001 (4 pages)
- VS52002 (4 pages)
- VS53001 (4 pages)
- VS53002 (4 pages)
- WB1701 (4 pages)
- WB1703 (4 pages)
- WB1704 (4 pages)
- VS36003 (4 pages)
- VS36004 (4 pages)
- WB1702 (4 pages)
- WB1705 (4 pages)
- VS38001 (4 pages)
- VS38002 (4 pages)
- VS3100_ (4 pages)
- VS15901 (1 page)
- VS17401 (1 page)
- VS17802 (1 page)
- VS18201 (1 page)
- VS18401 (1 page)
- VS18501 (1 page)
- VS18702 (1 page)
- VS18902 (1 page)
- VS18903 (1 page)
- VS28001 (1 page)
- VS29001 (1 page)
- VS26001 (1 page)
- VS18904 (1 page)
- VS27001 (1 page)
- VS3200_ (4 pages)
- WB1598 (4 pages)
- VS3400_ (4 pages)
- WB1597 (4 pages)
- WB1601 (4 pages)
- WB1603 (4 pages)
- WB1606 (4 pages)
- WB1607 (4 pages)