Feiss SF270 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulb not included.
1. Install glass panels: (see fig. 1)
A. Gently grabbing onto a glass panel, slip inside of
main frame. Make certain bottom edge of panel sits
inside of bottom tabs.
B. Secure glass panel by bending tabs located at top.
C. Repeat rest panels.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture than hire a qualified
electrician to create one.
3. Install long threaded pipe by screwing into bottom of
socket assembly. Note correct position of center pipe
at illustration.
4. Install light bulb (not included). See relamping label at
socket area for type and maximum allowed wattage.
5. Slip glass plate through long threaded pipe until it
checks inside of main frame. Lock glass plate by
fastening finial. Do not over tighten.
Assembly Instructions For
SF270
(E) 5/09
2
4
Fig. 1
3
5
1B
1A
1C