Feiss SF309 - Manual

1
Installation Instructions for
Pickering Lane 3 Light Semi-Flush Mount
1.1
SF309
Semi-Flush Mount
SF309_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory”
N R T L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Depending on desired mounting (chain or semi-flush), follow enclosed supplement installation instructions for electrical
and fixture installation onto house outlet box.
Install candle tube by slipping through socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade to the fixture by placing the ring on the shade, then secure them to the fixture with the threaded nipple,
rubber washer, steel cap, and hex nut.
Install font by fastening with finial.
1
2
3
1A
4
SEMI-FLUSH MOUNT INSTALLATION
LAMP
CANDLE TUBE
SHADE
FIXTURE
FINIAL
3
4
5
FONT
THREADED NIPPLE
2
RING
STEEL CAP
HEX NUT
RUBBER WASHER
5
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.