Feiss FM398 - Manual

1
Installation Instructions for
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Place the fixture base and washer over the threaded nipple, then secure them in place by fastening the coupler.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Screw the threaded pipe onto the coupler, then place the shade and shade washer over the threaded pipe and secure
them in place by tightening the nut.
Place the decorative frame over the threaded pipe and secure it in place by tightening the finial.
Hang the jewels by hooking them to the fixture as shown on drawing.
1
2
1A
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
4
1
THREADED NIPPLE
1
6
5
MOUNTING PLATE 1
THREADED PIPE
Caprice 3 Light Flush Mount
1.0
FM398
Ceiling
FM398_
LAMP
WASHER
COUPLER
DECORATIVE FRAME
FIXTURE BASE
4
5
JEWEL
NUT
FINIAL
SHADE
6
2
4
6
SHADE WASHER
3