Euramco Safety GC Series - Manual (Page 10)

10
ENGLISH
Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your EMISSION CONTROL SYSTEM WARRANTY
(page 13) for additional information.
SPECIFICATIONS
GC160
GC190
Tuneup Specifications
Quick Reference Information
Wiring Diagrams
Descriptive Term Applicable to Emissions Durability
Period
Moderate 50 hours (0–80 cc inclusive)
125 hours (greater than 80 cc)
Intermediate 125 hours (0–80 cc inclusive)
250 hours (greater than 80 cc)
Extended 300 hours (0–80 cc inclusive)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
Length x Width x Height 337 x 369 x 331 mm
(13.3 x 14.5 x 13.0 in)
Dry weight 11.5 kg (25 lb)
Engine type 4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke] 160 cm 3 (9.8 cu-in)
[64 x 50 mm (2.5 x 2.0 in)]
Net power *
(in accordance with SAE J1349) 3.4 kW (4.6 hp) at 3,600 rpm
Max. Net torque *
(in accordance with SAE J1349) 9.4 N•m (6.9 ft-lb) at 2,500 rpm
Oil capacity 0.58 l (0.61 US qt)
Fuel tank capacity 1.8 l (0.48 gal)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
Length x Width x Height 345 x 369 x 331 mm
(13.6 x 14.5 x 13.0 in)
Dry weight 13.2 kg (29 lb)
Engine type 4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke] 187 cm 3 (11.4 cu-in)
[69 x 50 mm (2.7 x 2.0 in)]
Net power *
(in accordance with SAE J1349) 3.9 kW (5.2 hp) at 3,600 rpm
Max. Net torque *
(in accordance with SAE J1349) 11.2 N•m (8.3 ft-lb) at 2,500 rpm
Oil capacity 0.58 l (0.61 US qt)
Fuel tank capacity 1.8 l (0.48 gal)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
* The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 3600 rpm (net power) and 2500 rpm (max.
net torque). Mass production engines may vary from this value. Actual
power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed off the
engine in application, environmental conditions, maintenance, and other
variables.
ITEM SPECIFICATION MAINTENANCE
Spark plug gap 0.7 ~ 0.8 mm
(0.028 ~ 0.031 in)
Refer to page 6.
Valve clearance
(cold) IN: 0.15 ± 0.04 mm
EX: 0.20 ± 0.04 mm
See your authorized
Honda dealer
Other specifications No other adjustments needed.
Fuel Type Unleaded gasoline with a pump octane
rating of 86 or higher (page 5).
Engine Oil Type SAE 10W-30, API SJ or later, for general
use. Refer to page 5.
Carburetor Idle Speed 1,400 ± 150 rpm
Spark plug Type BPR6ES (NGK)
Maintenance Before each
use Check engine oil level. Refer to page 5.
Check air filter. Refer to page 6.
First 5 hours Change engine oil. Refer to page 6.
Subsequent Refer to the maintenance schedule on
page 5.
SPARK
PLUG IGNITION
COIL IGNITION
SWITCH OIL LEVEL
SWITCH OIL
ALERT
UNIT
WITH OIL ALERT
POM53483-I.book Page 10 Friday, January 11, 2008 2:08 PM