Euramco Safety EV400 - Manual

SM-EV400 4/2009
EV400
Dual Current, Variable Speed, Turbo Blower
Congratulations on your purchase of the brand new EV400 Variable Speed Turbo Blower!
In response to our customers who expressed a need to operate the EV400 on both 15 amp and 20
amp circuits Euramco Safety, Inc. introduces the new EV400 Variable Speed Turbo Blower. The
EV400 is the ideal blower to be powered by industrial, generator, fire trucks, and residential power
circuits.
The EV400 is introduced with a Power Source selection switch feature that allows the EV400 to
function on a 20 amp or a 15 amp circuit, while avoiding nuisance circuit breaker trips, commonly
experienced when connecting a 20 amp device to a 15 amp circuit.
Operation
20 Amp Circuits
1. Connect the EV400 NEMA L5-20 twist-lock power
connector to a mating receptacle, capable of
providing 20 amps or more current at 120 VAC.
2. Raise the Red Switch Guard and toggle the
Power Source Switch to the 20 amp position.
3. Rotate the Speed Control clockwise to turn the EV400 Blower on and to select the desired
speed / CFM level.
15 Amp Circuit
1. Attach the AC Power Adapter Cable, provided, to
The EV400 Blower. This adapter cable, also known
as the “dog bone”, converts a NEMA L5-20 twist-
lock plug to standard NEMA 5-15 plug, suitable for
operation with15 amp 120VAC circuits.
2. Connect the NEMA 5-15 plug end of the adapter cable to a mating
15amp120VAC receptacle. Ensure the Red Switch Guard is in the
down position. This will force the Power Source Switch to the
15 amp position.
3. Rotate the Speed Control clockwise to turn the EV400 Blower on
and to select the desired speed / CFM level.
To turn blower off, rotate speed control knob
fully counter-clockwise until it clicks in to the
off position.
Euramco Safety ▪ 2746 Via Orange Way ▪ Spring Valley, CA ▪ 91978 ▪ 1-800-4-RAMFAN