ElmoMC SimplIQ Digital Servo Drives-Drum HV - Manual (Page 10)

Drum HV (High Voltage) Installation Guide Safety Information
MAN-DRU-HVIG (Ver. 1.602)
www.elmomc.com
10
1.3. Directives and Standards
The Drum HV (High Voltage) conforms to the following industry safety standards:
Safety Standard Item
In compliance IEC/EN 61800-5-1,
Safety Adjustable speed electrical power drive systems
In compliance UL 508C Power Conversion Equipment
In compliance with UL 840 Insulation Coordination Including Clearances and
Creepage Distances for Electrical Equipment
In compliance with UL 60950-1
(formerly UL 1950)
Safety of Information Technology Equipment
Including Electrical Business Equipment
In compliance with EN 60204-1 Low Voltage Directive 73/23/EEC
The Drum HV (High Voltage) servo drive has been developed, produced, tested and
documented in accordance with the relevant standards. Elmo Motion Control is not responsible
for any deviation from the configuration and installation described in this documentation.
Furthermore, Elmo is not responsible for the performance of new measurements or ensuring
that regulatory requirements are met.
1.4. CE Marking Conformance
The Drum HV (High Voltage) servo drive is intended for incorporation in a machine or end
product. The actual end product must comply with all safety aspects of the relevant
requirements of the European Safety of Machinery Directive 98/37/EC as amended, and with
those of the most recent versions of standards EN 60204-1 and EN 292-2 at the least.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending Council Directive
73/23/EEC concerning electrical equipment designed for use within certain voltage limits, the
Drum HV (High Voltage) meets the provisions outlined in Council Directive 73/23/EEC. The
party responsible for ensuring that the equipment meets the limits required by EMC
regulations is the manufacturer of the end product.
1.5. Warranty Information
The products covered in this manual are warranted to be free of defects in material and
workmanship and conform to the specifications stated either within this document or in the
product catalog description. All Elmo drives are warranted for a period of 12 months from the
time of installation, or 18 months from time of shipment, whichever comes first. No other
warranties, expressed or implied — and including a warranty of merchantability and fitness for
a particular purpose — extend beyond this warranty.