ElmoMC ExtrIQ Gold Line Servo Drives-Gold Eagle - Manual (Page 21)

Gold Eagle Installation Guide
MAN-G-EAGIG-EC (Ver. 1.000)
||Basic Recommendations| www.elmomc.com
21
Table of Contents
9.2.3. Feedback Cable Port C Connector
1. At the controller side connections, follow the controller manufacturer’s recommendations
concerning the shield.
2. The connection of the Drain wire to the Port C is not mandatory.
Figure 6: Feedback Port C Cable Assemblies
9.2.4. IO Cable Connector
It is recommended to use shielded cable, but is not mandatory.
Figure 7: Feedback IO Cable Assemblies