Chapter 5: unpacking the drive components, Chapter 5, Unpacking the drive components – ElmoMC ExtrIQ Gold Line Servo Drives-Gold Eagle User Manual
Page 11
Gold Eagle Installation Guide
MAN-G-EAGIG-EC (Ver. 1.000)
||Technical Data
11
Chapter 5:
Unpacking the Drive Components
Before you begin working with the Gold Eagle, verify that you have all of its components, as follows:
•
The Gold Eagle servo drive
•
The Elmo Application Studio (EASII) software and software manual
The Gold Eagle is shipped in a cardboard box with Styrofoam protection.
To unpack the Gold Eagle:
1.
Carefully remove the servo drive from the box and the Styrofoam.
2.
Check the drive to ensure that there is no visible damage to the instrument. If any damage
has occurred, report it immediately to the carrier that delivered your drive.
3.
To ensure that the Gold Eagle you have unpacked is the appropriate type for your
requirements, locate the part number sticker on the side of the Gold Eagle. It looks like this:
4.
Verify that the Gold Eagle type is the one that you ordered, and ensure that the voltage
meets your specific requirements.
The part number at the top provides the type designation. Refer to the appropriate part
number in the section Catalog Number at the beginning of the installation guide.