Elkhart Brass Scorpion RF 8294-07 - Manual (Page 13)

13
 Press the RED program button (SW1). The LED DS6 will blink two (2) times.
 Press both FOG and STRAIGHT STREAM simultaneously on either a primary or secondary
controller, and hold for 5 seconds.
 Position the monitor to the right upper limit of the travel window.
 Press the RED program button (SW1). The LED DS6 will blink three (3) times.
 Position the monitor to the desired stow position.
 Press the RED program button (SW1). The LED DS6 will blink four (4) times.
 Programming of the travel limits and stow position are now complete.