Det-Tronics X2200 UV Flame Detector with HART - Manual (Page 20)

95-8638 1.1 18
hArt setuP
This menu allows editing of the following functions:
1) Polling Address Address used by the host device to identify a field device.
2) Final Asmbly no. A number that is used for identification purposes, and is associated with the overall
field device.
3) tag Text that is associated with the field device installation. This text can be used by the
operator in any way.
4) date Any date chosen by the operator to be used for any purpose.
5) descriptor Text associated with the field device that can be used by the operator in any way.
6) message Text associated with the field device that can be used by the operator in any way.
set reAL time cLock
To set the real time clock, enter the current time and date information into the appropriate fields.
1) seconds 0 to 59.
2) minutes 0 to 59.
3) hours 0 to 23.
4) date 1 to 31.
5) month 1 to 12.
6) Year 0 to 99.
Set Real Time Clock
1) Seconds
2) Minutes
3) Hours
4) Date
5) Month
6) Year
Device Setup Menu
1) Configuration Menu
2) Calibration Menu
3) Write Protect
4) HART Setup
5) Set Real Time Clock
X2200 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu
HART Setup
1) Polling Address
2) Final Asmbly No.
3) Tag
4) Date
5) Descriptor
6) Message
Device Setup Menu
1) Configuration Menu
2) Calibration Menu
3) Write Protect
4) HART Setup
5) Set Real Time Clock
X2200 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu