Det-Tronics X5200 UVIR Flame Detector with HART - Manual (Page 10)

95-8636 2.1 8
hArt Pv menu
1) Pv unit Not implemented for X5200.
2) Pv Not implemented for X5200.
3) Pv snsr unit Not implemented for X5200.
4) Pv usL Not implemented for X5200.
5) Pv LsL Not implemented for X5200.
6) Pv min sPAn Not implemented for X5200.
7) Pv dAmP Not implemented for X5200.
8) Pv Ao Analog Output. The value that tracks the Digital Value representation, under normal
operating modes.
9) Pv Ao ALrm tYP Not implemented for X5200.
10) Pv % rnge Percent of Range. The variable that tracks the Digital Value representation with
respect to the range defined by the Lower Range Value and Upper Range Value, for
normal operating modes. The units of this variable are always in percent.
11) Pv XFer Fnctn Not implemented for X5200.
12) Pv rnge unit Not implemented for X5200.
13) Pv urv Not implemented for X5200.
14) Pv Lrv Not implemented for X5200.
15) Pv snsr s/n Not implemented for X5200.
HART PV Menu
1) PV Unit
2) PV
3) PV SNSR Unit
4) PV USL
5) PV LSL
6) PV MIN SPAN
7) PV DAMP
8) PV AO
9) PV AO ALRM TYP
10) PV % RNGE
11) PV XFER FNCTN
12) PV RNGE Unit
13) PV URV
14) PV LRV
15) PV SNSR S/N
HART Info Menu
1) Universal Rev
2) Field Device Rev
3) Final Asmbly No.
4) Tag
5) Date
6) Descriptor
7) Message
8) Num Req Preams
9) HART PV Menu
10) Condensed Status
Device Info Menu
1) General Info Menu
2) HART Info Menu
3) Status Info Menu
4) Detector Settings
5) History Menu
X5200 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu