Despatch LCC/LCD2-14PT-3 Pass Through Series - Manual (Page 12)

2
Features
Despatch Protocol Plus microprocessor-based digital programmable control, with
simultaneous digital readout of both setpoint and actual temperatures.
CE compliance, including yellow and red disconnect switch/EMO mounted in the
front control panel door.
Manual reset high-limit control.
Proportioning temperature control using solid state relays.
Four (4) inches of insulation minimizes heat loss, external thermal spots and air
leakage.
Stainless steel exterior and interior, with all interior seams continuously welded
on the insulation side to protect the work chamber from contamination.
Horizontal airflow, which achieves air temperature uniformity of +/- 1% of
operating temperature.
Recirculation motor is mounted in the machinery compartment underneath the
oven, providing convenient access.
Indicator lights on the sterile side showing cycle status, and alerting operator if
non-sterile door is open.
Electrical door lock switch on each door prevents operator from opening chamber
door when cycle is in process or having both doors open at the same time. Door
lock switch has manual override for authorized maintenance personnel to release
door in case of power failure.
Options
Beacon light option on control panel provides visual cycle process indication to
operator (red/amber/green)
High-limit alarm/alarm silence switch option
Recorder option
Modbus RS422/485 communications option to Protocol Plus controller