Despatch LBB2-xxA/B-2 - Manual (Page 44)

M AINTENANCE LBB Series Oven Owner’s Manual
44 Version 18
Figure 13. Remove Control Panel to Access Control Instrument (using T20 Torx bit driver).
6.5.1. Replace the Control Instrument
Danger!
Do not attempt any service on this oven before opening the
main power disconnect switch or removing all power from the
oven.
Tools needed:
•
One-quarter (1/4) inch socket set
•
P1 Phillips Tip Screwdriver
•
T20 Torx bit driver
1.
Disconnect power.
2. Remove four screws from the face of the control panel (Figure 13).