Despatch LAC2-12-7 - Manual (Page 22)

A SSEMBLY & S ETUP LAC Series Oven Owner’s Manual
22 Version 1
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
4. Assembly & Setup
Assembly and Setup provides directions for unpacking and installing your LAC-7 Series oven.
4.1. Unpack & Inspect the LAC-7 Series Oven
Remove all packing materials and thoroughly inspect the oven for any damage that might have
occurred during shipment.

Note condition of carton and plastic cover sheet inside carton.

Observe all outside surfaces and corners of the oven for scratches and dents.

Check oven controls and indicators for normal movement, bent shafts, cracks, chips or
missing parts such as knobs and lenses.

Check the door and latch for smooth operation.
Caution!
Do not tilt oven while lifting or lift oven using the door handle to
prevent damage to the oven and/or personnel involved.
Caution!
Do not risk injury when lifting equipment. Take proper
precautions when lifting, carrying or otherwise maintaining
heavy items.
Notice
How to lift the different sizes of ovens:

LAC1-10: Two
people lift oven’s lower corners and place on wheeled
transport pallet. Push pallet to desired site and lift oven
from pallet, again using lower corners.

LAC1-38: Four
people lift oven’s lower corners and place on wheeled
transport pallet. Push pallet to desired site and lift oven
from pallet, again using lower corners.

LAC1-67, LAC2-12
& LAC2-18: Do not lift by hand. Lift with fork lift and
transport pallet.