Straightwall-mount2.ai – Deckorators Secondary Handrail User Manual

Page 3

Straight Aluminum Wall Mount

Step 1: Slide aluminum wall mount into handrail.
Step 2: Drill 5/32” pilot holes into desired surface and attach
wall mount using 1-1/2” screws provided.
Step 3: Drill 3/16” pilot holes into handrail and attach using
3/4” screws provided.

StraightWall-Mount2.ai

90° Outside Corner

Step 1: Attach two aluminum brackets to adjacent corners of post,
following instructions from “Aluminum Bracket”.
Step 2: Dry fit the two handrails to be joined. The handrails should
extend far enough to allow for final cutting. Place outside corner
in line with each handrail. Mark handrails and cut as necessary.
Step 3: Slide aluminum joiners into both sides of outside corner.
Slide joiners into handrails, and follow instructions for “Aluminum
Joiner Kit”.
Step 4: Attach handrails to brackets, following instructions from
“Handrail with Aluminum Insert”.

90°OutsideCorner.ai

180° Post Return

Step 1: Position post return in desired location. Mark and cut as
necessary.
Step 2: Attach post return to handrail system using aluminum
joiner.
Step 3: Attach aluminum bracket to the desired surface, following
instructions from “Aluminum Bracket.”
Step 4: Attach post return to aluminum bracket, drilling 3/16” pilot
holes and securing with 3/4” screws provided.

180PostReturn.ai

13.5” Wall Return

Step 1: Position 13.5” wall return in desired location. Mark and cut
as necessary.
Step 2: Attach wall return to handrail system using aluminum joiner
or adjustable joiner.
Step 3: Attach the handrail to the aluminum bracket.

Secondary Handrail Installation Instructions – Page 3

The diagrams and instructions in this brochure are for illustration purposes only and are not meant to replace a licensed professional. Any construction or use

of the product must be in accordance with all local zoning and/or building codes. The consumer assumes all risks and liability associated with the construction

or use of this product. The consumer or contractor should take all necessary steps to ensure the safety of everyone involved in the project, including, but

not limited to, wearing the appropriate safety equipment. Seller makes no warranty for this product, either express or implied. Seller expressly disclaims any

and all liability for damages arising out of the use or ownership of the product, including disclaiming incidental and consequential damages, unless otherwise

required by state law.

This handrail configuration has been tested and meets the
requirements of 2009 IBC/IRC.

6' O.C.

Structural
Support

Aluminum
Bracket
with Screws
Provided

Handrail with
Aluminum Insert

Handrail Asm.ai

(2) #14 x 1"
Screws
Provided

Universal Consumer Products, Inc.

3851 Revere Street

Denver, CO 80239

877-436-8379

www.ufpi.com