beautypg.com

Deckorators Angle Bracket User Manual

Deckorators, Angle bracket installation instructions

background image

Deckorators

®

Angle Bracket Installation Instructions

Centerline

Centerline

Centerline

Centerline

2

3

4

5

Step 1.

Step 2.

Step 3.

Step 4.

Centerline

Bevel1.ai

Centerline

Centerline

Centerline

Centerline

2

3

4

5

Step 1.

Step 2.

Step 3.

Step 4.

Centerline

Bevel1.ai

Centerline

Centerline

Centerline

Centerline

2

3

4

5

Step 1.

Step 2.

Step 3.

Step 4.

Centerline

Bevel1.ai

Centerline

Centerline

Centerline

Centerline

2

3

4

5

Step 1.

Step 2.

Step 3.

Step 4.

Centerline

Bevel1.ai

Centerline

Centerline

Centerline

Centerline

2

3

4

5

Step 1.

Step 2.

Step 3.

Step 4.

Centerline

Bevel1.ai

Step 1. Precut the inner rail to

required angle to match post.

(fig. 1)

Step 2. Mark centerline of rail and

centerline of post sleeve.

(figs. 2 & 3)

Note: The actual length of
the end cut on the rail is
dependent upon the angle
of the cut. (The sharper the
angle, the longer the cut
will be.)

Align the rail to the post center-
line and mark the width of the
rail on the post. (fig. 4)

Step 3. Using the marks as a reference,

install the angle bracket to the
post. Align the inside surface
of the short leg with the width
mark on the post. (fig. 5)

Step 4. Set the rail in place and bend

the bracket until it aligns with
the side of the rail. (fig. 6)

Step 5. Pre-drill the two holes in the rail

and fasten to the bracket with
small (1”) screws . (fig. 7)

Step 6. Bend the other leg of the

bracket into position against
the rail. Pre-drill and fasten with
two more small screws (1”).

(fig. 8)

Step 7. Cut the top rail to match the

angle and attach to the inner
rail. (fig. 9)

fig. 1

fig. 2

fig. 3

fig. 4

fig. 5

Centerline

Centerline

Step 6.

Step 7.

Step 5.

Bevel2.ai

Step 8.

Centerline

Centerline

Step 6.

Step 7.

Step 5.

Bevel2.ai

Step 8.

Centerline

Centerline

Step 6.

Step 7.

Step 5.

Bevel2.ai

Step 8.

Centerline

Centerline

Step 6.

Step 7.

Step 5.

Bevel2.ai

Step 8.

fig. 6

fig. 7

fig. 8

fig. 9

© 2012 Universal Forest Products, Inc. All rights reserved.

Deckorators is a registered trademark of Universal Consumer Products, Inc. 6825_3/12

Inner Rail

Inner Rail

Post

Sleeve

Post

Sleeve

Inner
Rail

Post

Sleeve

Angle

Bracket

Angle

Bracket

Post

Sleeve

Inner Rail

Post

Sleeve

Angle

Bracket

Inner

Rail

Post

Sleeve

Inner Rail

Angle

Bracket

Post

Sleeve

Angle

Bracket

Inner Rail

Top Rail

Deckorators.com