Condux Winch Line Blower System - Manual (Page 8)

CONDUX WINCH LINE BLOWER 6
!CAUTION: Always know approximate length of the conduit runs and make
certain the winch drum contains enough winch line cable to reach the entire
distance before using the winch line blower.
!CAUTION: Inspect the winch line cable or know the condition of the cable before
using the winch line blower. Replace any cables that are kinked or have worn or
broken strands before using the winch line blower.
4. Insert the missile into the conduit and push into the conduit approximately one arms
length. (See Fig. 2)
FIGURE 2: INSERT MISSILE INTO CONDUIT
5. Place split-threaded adapter around winch line and screw threaded adapter into pipe
until tight by hand. Use adjustable wrench and screw threaded adapter one more full
turn. See Figure 3 & 4
!CAUTION: Before each use, visually inspect the Winchline Blower Body,
threaded adapters, and the missiles for signs of wear, fatigue, and/or breakage. If
any of these items show signs of wear, they should be replaced or system
function and efficiency will be affected (Reference Appendix).