Comelit MT CT 01 - Manual (Page 8)

MT CT 01
MT CT 01 7
FOLLOW-ME:
This is the service which allows an entry phone call on the outside line to be transferred to a number
programmed by the user (See paragraph 5.7).
REMOTE SOS LINE:
This is the service which allows a list of telephone numbers to be called if an alarm signal is present on the
switchboard (See paragraph 5.9).
LINE-TO-LINE FOLLOW-ME:
This is the service which allows a call from an outside line to be transferred on the other outside line to a
telephone number programmed by the user (See paragraph 5.8).
AUTOMATIC FAX RECOGNITION:
This is the service allowing the fax on a branch characterised as Fax or Telephone Fax to be routed
automatically (See paragraph 5.4).
REMOTE RELAY CHECK:
This is the service which allows the relays present on the entry phone expansion card art.2909 to be activated
from the outside line and possibly to control their state of closed or open (See paragraph 5.6).
LOCAL PROGRAMMING:
This allows configuration of the switchboard to be carried out by means of a RS232 serial line, using the
Configuration Manager software Art.1296.
REMOTE MANAGEMENT:
This allows both updating of the firmware and configuration of the switchboard from an outside line (See
paragraph 9).
FLOOR DOOR CALL:
The signal of an entry phone call present on terminals S1 / S2 / S3 / S4 is treated as a simple signal instead of
the standard call which foresees audio connection with the external unit (See paragraph 8.17).
RIDO ( RIsposta DOppia [DUal ANswer] ):
This is the service allowing branch 801 which is in the situation of intermediate call, to serve a further call
coming from an outside line.
T
YPES OF
A
PPARATUS
The switchboard can operate with BCA keypad telephones (decade or DTMF), cordless (CT1, CT2, DECT),
answer phones, faxes, etc.
Furthermore, it is possible to connect the COMTEL telephone Art. 1926 - 4921 - 4922 in the Operator Post
version or branched user.