Comelit MT CT 01 - Manual (Page 35)

GROUP S.P.A.
MT CT 01 34
5.7.2 Configuration
Enter the state of configuration (See paragraph 8.0).
5.7.3 Enabling (PO)
5.8 L
INE
-
TO
-
LINE FOLLOW
-
ME
5.8.1 Description
If the telephone expansion card 2908 is present, and therefore if two telephone lines are activated, it is
possible to divert a telephone call from one line to the other line, to a telephone number recorded by the user.
When the user called replies, they will be put in communication with the caller and the following will be possible:
a. end the conversation by pressing DTMF digit 0.
b. renew the conversation (timed at 1 minute), by pressing any DTMF digit other than 0, when the switchboard
sends the tone which signals that the conversation time is coming to an end.
a = 1,2,3,4 (call button )
a = 1,2,3,4 (call button )
DESCRIPTION COMMAND PARAMETER VALUES
7 4 0 a
7 4 1 a
Deactivation
Activation
4 3 a b c d … #
DESCRIPTION COMMAND PARAMETER VALUES
Configuration
a = 1-4 (entry phone call
button)
b = 0 ( resets configuration )
1-2 ( outside line )
3 ( first available )
c = 0 ( Day )
1 ( Night )
d = telephone number
( max 16 digits )
DEFAULT VALUES: Service not configured.
EXAMPLE: 43 2 1 0 034675001# Follow-me configured on call from button 2
to outside line 1 on number 0346750001 in the DAY scenario
43 1 2 1 034675002# Follow-me configured on call from button 1
to outside line 2 on number 0346750002 in the NIGHT scenario