Comelit MT CT 01 - Manual (Page 46)

MT CT 01
MT CT 01 45
6.12.2 Configuration
6.12.3 Activation / Deactivation
6.13 L
ISTENING TO MUSIC ON HOLD
(OP)
The switchboard is supplied with 3 pieces of on hold music, and it is possible to listen to these with the following command.
6.14 R
EMOTE PROGRAMMING
/ R
EMOTE FIRMWARE UPLOADING
(OP)
6.15 D
IRECT OUTSIDE LINE CONNECTION
The branch can be connected directly to the outside line using the relay bypass.
This takes place with the following method:
• The branch dials 95 followed by the telephone number.
• The branch is connected directly to the outside line, skipping the switchboard circuits.
• The service ends when the branch closes the conversation.
Limits of the service:
• If there is only basic card Art. 2906, only Branch 801 can use the service.
• With addition of the outside line expansion card Art. 2908, the service is also extended to branch 802.
This service is particularly suitable for Internet connections.
a b = hours
c d = minutes
DESCRIPTION COMMAND PARAMETER VALUES
7 8 0
7 8 1
7 8 2
Disabling
Enabling
Setting alarm clock time
COMMAND PARAMETER VALUES
9 5
a b c d
a … a = telephone number
DESCRIPTION COMMAND PARAMETER VALUES
Listening to music on hold 7 8 3
a = 1 (Music 1 - Spring by Vivaldi)
2 (Music 2 - Catalan Melody)
3 (Music 3 - Over the Rainbow)
4 (External music)
a
DESCRIPTION COMMAND PARAMETER VALUES
Enabling remote configuration
without access to the directory
7 7 7 7
DESCRIPTION COMMAND PARAMETER VALUES
Setting system time
a b = hours
c d = minutes
7 4 a b c d #