Comelit MT CT 01 - Manual (Page 31)

GROUP S.P.A.
MT CT 01 30
5.2.3 Enabling / disabling (OP)
5.3 C
OURTESY MESSAGE
5.3.1 Description
With expansion card 2913 it is possible to record a message which can be sent to an external unit in the case
of entry phone call or to a line in the case of a telephone call.
A typical example is the message giving the opening times of the offices which can be sent to an external unit
and to a line during the times the offices are closed.
The message is recorded directly from a telephone. During the configuration stage it is defined which
telephone line and / or which call from an external unit the message must be sent over.
5.3.2 Configuration
Enter the state of configuration (See paragraph 8.0).
It is not possible to carry out the Courtesy message service if the switchboard is already sending a message
over an outside line or over an entry phone. In this case a simple call will be sent.
DESCRIPTION COMMAND PARAMETER VALUES
Activation of Courtesy on
Outside Lines
Deactivation Courtesy on
Outside Lines
Activation of Courtesy on
entry phone call buttons
Deactivation of Courtesy on
entry phone call buttons
DEFAULT VALUES: Service not configured on all the lines either in DAY or NIGHT scenario.
Service not configured on all the call buttons either in DAY or NIGHT scenario.
EXAMPLE: 63 0 12 # configure the Courtesy service on Line 1 and Line 2 in the day scenario.
65 0 124 # configure the Courtesy service on entry phone call 1, 2 and 4 in the day scenario.
6 3 a b # …
6 4 a b # …
6 5 a b # …
6 6 a b # …
a = 0 (Day)
1 (Night)
b = 1, 2 (list of lines)
a = 0 (Day)
1 (Night)
b = 1, 2 (list of lines)
a = 0 (Day)
1 (Night)
b = 1,2,3,4 (list of call buttons)
a = 0 (Day)
1 (Night)
b = 1,2,3,4 (list of call buttons)
DESCRIPTION COMMAND PARAMETER VALUES
Activation of automatic
DAY/NIGHT service
Deactivation of automatic
DAY/NIGHT service
7 * 3 #
7 * 4 #
DEFAULT VALUES: Service deactivated.