Comelit MT CT 01 - Manual (Page 26)

MT CT 01
MT CT 01 25
4.8 P
UTTING ON HOLD
This operation is valid both for internal and telephone calls.
4.9 I
NTERMEDIATE CALL
This means the possibility by branch A of putting an outside line / extension branch B on hold and making a
second call to an outside line / extension branch C, or a command to an entry phone. It is carried out by
following the table below:
By keying in the R2 sequence, branch A can speak alternately (toggle) with user B (C is put on hold) or
with user C (B is put on hold).
4.10 C
ONFERENCE
R
Telephone waiting for commands
Continuous tone
on A
EXAMPLE
Conversation between
branch A and B
A presses:
FLASH button, R
STANDARD BCA TELEPHONE
Conversation Putting B on hold
Music on hold
on B
EXAMPLE
Music on hold
on B
Conversation
with extension C
EXAMPLE
Conversation between
branch A and B
A presses:
FLASH button, R
STANDARD BCA TELEPHONE
Conversation Putting B on hold Putting extension B on hold and extension C call
Button 8 followed
by the extension desired
from 01 to 08 (e.g. 04) (C)
Extension 04 (C)
rings
8 0 4
Music on hold on C Conversation with extension B
EXAMPLE
Conversation between branch A
and C with B on hold A dials the R2 sequence
STANDARD BCA TELEPHONE
Conversation Putting C on hold Putting C on hold and recovery of B
R 3
EXAMPLE
Conversation between branch A - B and C on hold A dials the R3 sequence Simultaneous A - B - C conversation
STANDARD BCA TELEPHONE
Intermediate conversation Conference
C
A B
C
A B
C
A B
C
A B
C
A B
A B
A B R
R 2