chiliGREEN GA-A75M-UD2H User Manual

Page 66

Unique Features

- 66 -

Step 4:
Press and then to exit Q-Flash and reboot the system. As the system boots, you should see
the new BIOS version is present on the POST screen.

Step 5:
During the POST, press to enter BIOS Setup. Select Load Optimized Defaults and press
to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend
that you reload BIOS defaults.

Step 6:
Select Save & Exit Setup and then press to save settings to CMOS and exit BIOS Setup. The proce-
dure is complete after the system restarts.

Press to load BIOS defaults

Load Optimized Defaults



MB Intelligent Tweaker(M.I.T.)



Standard CMOS Features



Advanced BIOS Features



Integrated Peripherals



Power Management Setup



PnP/PCI Configurations



PC Health Status

ESC: Quit

higf

: Select Item

F11: Save CMOS to BIOS

F8: Q-Flash

F10: Save & Exit Setup

F12: Load CMOS from BIOS

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Load Optimized Defaults (Y/N)? Y