chiliGREEN GA-A75M-UD2H - Manual (Page 34)

BIOS Setup - 34 -
2-1 Startup Screen
The following screens may appear when the computer boots.
A. The LOGO Screen (Default)
B. The POST Screen
Motherboard Model
BIOS Version
Function Keys
Function Keys:
: POST SCREEN
Press the key to show the BIOS POST screen. To show the BIOS POST screen at system start-
up, refer to the instructions on the Full Screen LOGO Show item on page 45.
: BIOS SETUP\Q-FLASH
Press the key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
: XPRESS RECOVERY2
If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the
key can be used for subsequent access to Xpress Recovery2 during the POST. For more information,
refer to Chapter 4, "Xpress Recovery2."
: BOOT MENU
Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use the up
arrow key or the down arrow key to select the first boot device, then press to accept.
To exit Boot Menu, press . The system will directly boot from the device configured in Boot Menu.
Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order
will still be based on BIOS Setup settings. You can access Boot Menu again to change the first boot de-
vice setting as needed.
: Q-FLASH
Press the key to access the Q-Flash utility directly without having to enter BIOS Setup first.
Function Keys
Award Modular BIOS v6.00PG
Copyright (C) 1984-2011, Award Software, Inc.
GA-A75M-UD2H F1c
.
.
.
.
: BIOS Setup : XpressRecovery2 : Boot Menu : Qflash
05/26/2011-Llano-Hudson-7A66HG02H-00