chiliGREEN RC410M -A82C - Manual (Page 7)

7 77 77
MOTHERBOARD LAYOUT
The following diagram shows the relative positions of the jumpers, connectors,
major components and memory banks on the motherboard.
NOTE
1) Be sure to check the cable orientation in order to match the colored strip to the
pin 1 end of the connector.
2)When you start up the system, please wait for 5 seconds after you power on
AC.
3) Adding a metal spaced plate to the back of the Socket 775 is not recommended
as this will short motherboard components and damage the system.
LGA775 Socket
FO
X
C
O
N
N
REM
O
V
E