chiliGREEN RC410M -A82C User Manual
Page 36
36
36
36
36
36
Technical Reference Booklet
Set Supervisor/User Password
When this function is selected, the following message appears at the center
of the screen to assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press
typed now will clear any previously entered password from CMOS memory.
You will be asked to confirm the password. Type the password again and
press
password, just press
message will confirm the password being disabled. Once the password is
disabled, the system will boot and you can enter BIOS Setup freely.
PASSWORD DISABLED
If you have selected “System” in “Security Option” of “BIOS Features Setup”
menu, you will be prompted for the password every time the system reboots
or any time you try to enter BIOS Setup. If you have selected “Setup” at “Secu-
rity Option” from “BIOS Features Setup” menu,you will be prompted for the
password only when you enter BIOS Setup.
Supervisor Password has higher priority than User Password. You can use
Supervisor Password when booting the system or entering BIOS Setup to
modify all settings. Also you can use User Password when booting the sys-
tem or entering BIOS Setup but can not modify any setting if Supervisor Pass-
word is enabled.
Save & Exit Setup
Navigate to this option and press
made in the Setup Utility and exit the Setup Utility. When the Save and Exit
dialog box appears, press
main menu.
Exit Without Saving
Navigate to this option and press
have made in the Setup Utility and exit the Setup Utility. When the Exit Without
Saving dialog box appears, press
Note: If you have made settings that you do not want to save, use the “Exit
Without Saving” item and press