CHAMPION P7-30 Manual - Manual (Page 24)

16
Electrical Controls
(continued)
Note:
The remote control cabinet controls the pulper and the water extractor.
1. Push the STOP push button on the Start/Stop Station located at the top of the water extractor.
2. Turn the Disconnect Breaker Switch located
on the Remote Control Cabinet to the
RESET/LOCK position.
3. Engage the handle lock and insert a locking
device to prevent the Breaker Switch from
turning. Attach a tag on the Breaker Switch
to indicate that work is being performed on
the circuit.
Initial Start-up - Pulper/Water Extractor