CHAMPION P7-30 Manual - Manual (Page 13)

#1 #2
#3 #4
#5 #6
Theory of Operation
Theory of Operation
Feed-trough Configurations
Six standard feed-trough configurations for the waste handling system are shown below.
A feed-trough system semi-automates the waste loading operation by providing an alternative to
the under-table feed-tray design shown on the previous page.
The operator separates food and paper waste from the wares and places them in the trough.
Slurry water, which flows down the trough, carries the waste into the pulper. The slurry water is
supplied by a recirculating pump mounted on the water extractor.
4 5