CHAMPION P7-30 Manual - Manual (Page 22)

14
Initial Start-up - Pulper/Water Extractor
WARNING!
Death or serious injury may result if hands, clothing, or jewelry are
caught in the machine.
The Waste Handling System contains ROTATING PARTS
moving at high speed.
WARNING!
Death or serious injury may result if safety devices are not working.
NEVER operate the machine unless all safety devices are in good
working condition and all safety covers are in place on the machine.
WARNING!
Electric shock may cause death or serious injury.
Do not work on energized circuits. Turn off all main power
service disconnects, lock them out and place a tag on the
switch and/or breaker to indicate that work is being performed
on the circuit.
Pulper • Initial Start-up
1. The steps below describe the initial start-up procedure for the close-coupled pulper and
water extractor. The Remote Control Cabinet controls both units.
2. Make sure the waste handling system matches the specifications detailed in the P&E.
3. Make sure the pulper and the water extractor are securely mounted to the finished floor.
4. Review the Theory of Operation beginning on page 2.
5. Make sure the main power supply is disconnected. Lock-out the circuit and place a tag
on the switch and/or breaker to indicate that work is being performed on the circuit.