Brother HL-2400C - Manual (Page 97)

USER’S GUIDE
4–34
If CARD is selected,
Display Message Card Operation
FORMAT CARD Format a new flash memory card or HDD
card.
exit Exit to CARD OPERATION
When the display shows “FORMAT CARD,” press the Set button to
format the installed card.
After the printer finishes formatting the card, you must exit to the “CARD
OPERATION” menu.
✒ Notes
When the card is formatted, data that has been previously written is
erased.
It takes ten or more seconds to format a 2-Mbyte flash memory card
or HDD card. The larger the capacity of the card, the longer time it
takes to format the card.
When the installed flash memory card or HDD card is formatted:
When you enter this mode menu with a formatted flash memory card or
HDD card installed, the display shows the following menus:
Display Message Card Operation
CARD 1 Select Card 1.
CARD 2 Select Card 2.
After you have selected the card, the display shows the following
messages:
Display Message Flash Operation
EXECUTE DATA Select the data ID and execute the selected
data. This menu appears only when data has
been saved on the card.
CARD LIST Print out the contents of the flash memory
card or the HDD card. This menu appears
only when anything has been saved in the
card.
SAVE Save received data, macros, and fonts.
DELETE Delete items from the card.