Fuser cleaner -9, Fuser cleaner message -9, Fuser cleaner change message -9 – Brother HL-2400C User Manual

Page 150: Replacing the fuser cleaner -9, Warning

Text mode
Original mode

CHAPTER 5 MAINTENANCE

5-9

Fuser Cleaner

Fuser Cleaner Message

When the following message appears on the LCD panel, you need to
prepare a new Fuser Cleaner.

REPLACE FCR

Fuser Cleaner Change Message

When the following message appears on the LCD panel and the printer
stops printing, you need to replace the Fuser Cleaner.

24 CHANGE FCR

Replacing the Fuser Cleaner

Warning

The Fusing unit and the parts around it are HOT. Be sure to wait
about 30 minutes before you start replacing the Fuser Cleaner.
If you touch the HOT parts, you might get injured.

1. Press the

Power

button to turn the printer off and wait until it cools

down for approximately 30 minutes.

2. Open the Top cover.

3. Release the Oil Bottle Lock Levers on both sides as shown below.

Fig. 5-6 Release the Levers