Carbolite VMF Series - Manual (Page 15)

AAF, GSM, VMF
MF06 3.32
15
8.0 F USES & P OWER S ETTINGS
8.1 Fuses
F1-F3: Refer to the circuit diagrams.
F1
Internal
supply
fuses Fitted if supply cable fitted.
Fitted on board to some types of EMC filter. on-board and up to 16 Amps:
32mm x 6mm type F
other: GEC Safeclip
F2
Auxiliary
circuit
fuses Fitted on board to some types of EMC filter.
May be omitted up to 25Amp/phase supply
rating. 2 Amps glass type F
On board: 20mm x 5mm
Other: 32mm x 6mm
F3
Heat Light
fuses May be omitted up to 25 Amp/phase supply
rating. 2 Amps glass type F
32mm x 6mm
Customer
fuses Required if no supply cable fitted.
Recommended if cable fitted. See rating label for amperage;
see table below for fuse rating.
Model Phases Volts Supply Fuse
rating
AAF 11/3 1-phase 200-240 10A
1-phase 110 20A
AAF 11/7 1-phase
1-phase
1-phase
2-phase+N 220-240
200-208
110-120
380/220-415/240 20A
20A
40A
10A per phase
AAF 11/18 1-phase 220-240 30A
1-phase 200-208 40A
3-phase+N 380/220-415/240 12.5A per phase
3-phase delta 220-240 20A per phase
3-phase delta 200-208 25A per phase
AAF 12/3 1 phase 200 - 240 10A
AAF 12/7 1-phase 220–240 25A
AAF 12/18 1-phase 220-240 30A
1-phase 200-208 40A
3-phase+N 380/220-415/240 12.5A per phase
3-phase delta 220-240 20A per phase
3-phase delta 200-208 25A per phase
GSM 11/8 1-phase
1-phase
1-phase 220-240
200-208
110-120 12.5A
15A or 16A
25A
VMF 10/6 1-phase 220-240 12.5A
8.2 Power Settings
The settings of the power limit parameter OP.Hi are as follows.
model volts: 110 200 208 220, 380 230, 400 240, 415 254, 440
AAF 11/3 87 100 98 87 80 73 65
AAF 11/18 100 100 100 100 94 83
AAF 12/3 100 95 85 78 71
AAF 12/7 100 100 100
AAF 12/18 100 100 100 100 94 83
all other models 100 100 100 100 100 89