Carbolite AX120 - Manual (Page 12)

Carbolite, Parsons Lane, Hope,
Hope Valley, S33 6RB, England.
Telephone: +44 (0)1433 620011
Facsimile: +44 (0)1433 621198
E-mail: [email protected]
The products covered in this manual are only a small part of the wide range of
ovens, chamber furnaces and tube furnaces manufactured by Carbolite for
laboratory and industrial use. For further details of our standard or custom built
products please contact us at the address below, or ask your nearest stockist.
Copyright © 2014 Carbolite Limited
For preventive maintenance, repair and calibration of all Furnace
and Oven products, please contact:
Carbolite Engineering Services
Telephone: +44 (0)1433 624242
Fax: +44 (0)1433 624243
Email: [email protected]
LMF07 – 1.07 14/08/14
8.0 S PECIFICATIONS
Carbolite reserves the right to change specifications without notice .
8.1 Models Covered by this Manual
Apex range of fan assisted laboratory ovens.
MODEL Max.
Temp. Max.
Power Chamber Size
(mm)
Approx.
Capacity Overall Size
(mm)
Net
Weight
(°C) (kW) h w d (l) H W D (kg)
AX30 250°C 1.0 295 300 320 28 440 590 465 24
AX60 250°C 1.5 395 400 420 66 540 690 565 37
AX120 250°C 2.0 495 500 420 128 640 790 565 55
8.2 Environment
The ovens contain electrical parts and should be stored and used in indoor conditions as follows:
temperature: 5°C - 40°C
relative humidity: maximum 80% up to 31°C decreasing linearly to 50% at 40°C