C.B.S. Scientific DH Series - Manual (Page 7)

C.B.S.  Scientific 7 Dedicated Height Sequencer
Section 2
Description of Parts
2.1
Unpacking- Dedicated Height Sequencer
Please verify that your sequencing unit comes complete with the following components:
• Buffer reservoirs, upper & lower with • Leveling base with leveling feet
safety covers with attached power leads • Bar Clamp
• Drain plugs installed in upper reservoir • 2 white nylon tubing adapters for buffer
• 4 white spring clamps drain ports
(Cat.# GPC-0001) • Epoxy-coated anodized aluminum heat dispersion
• 4 knurled black thumb screws plate
for securing lower reservoir to base
reservoirs
If a kit was ordered verify that you received the following accessories:
• 1 comb (sharktooth or rectangular) • 1 set spacers
• 1 set glass plates • 1 roll gel sealing tape, cat. # GT-72-10
• 2 wedge plate separators
cat. # WPS-100 (not shown)