Barranca Diamond MK-5009G/5013G - Manual (Page 8)

8
• NEVER disconnect any “emergency or safety devices”. These devices are intended for operator safety.
Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these
devices will void all warranties.
• Unauthorized equipment modifications will void all warranties. Manufacturer does not assume responsibility for any
accident due to equipment modifications.
• NEVER use accessories or attachments, which are not recommended by MK Diamond for this equipment.
Damage to the equipment and/or injury to user may result.
• NEVER lubricate components or attempt service on a running machine.
• Keep the machinery in proper running condition.
• Fix damage to the machine immediately and always replace broken parts, or missing decals.
WARNING
DO NOT use woodcutting, or carbide blades on this machine! Use ONLY Diamond blades on machine. Use machine
only to cut tile and masonry products. DO NOT use machine to cut wood or wood products.
MAINTENANCE SAFETY
MK-5000G SAFETY
Before starting the machine, ALWAYS check that all guards are in position and correctly fitted. Check the machine for
loose bolts before starting.
Keep area around the machine clear of obstructions which could cause persons to fall onto moving parts.
ALWAYS ensure that the machine is on level ground before using.
Know how to stop the machine quickly in case of emergency. NEVER try to stop a moving blade with your hands.